Description:

DENALI DRL Daytime Running Lights With Universal Fender Mounting Kit - Amber

This Daytime Running Light Kit is designed to mount a pair of DENALI DRL pods on the front fender of your bike, creating maximum visibility to oncoming traffic. This kit directly replaces the original M5 or M6 fender hardware securing the DRLs close to the fender for a sleek, low-profile installation.

Purpose built to create the most amount of light from the smallest, slimmest housing possible, the DENALI DRLs integrate perfectly with the front end and are unbelievably bright. Complete with an integrated dual intensity circuit, the lights can be wired to run at full intensity, half intensity or automatically switch between the two with the motorcycle's original high beam switch. A waterproof connector and posi-tap pigtail utilize power from your vehicles running light circut, making installation a breeze and operation effortless; the DRLs will simply come on and turn off with your vehicle's ignition.

Like emergency strobe lights, the DENALI DRL optics are designed to concentrate the light at the source as opposed to project it down the road. While ideal for daytime and nighttime conspicuity, these lights will also provide a noticeable spread of light immediately in front of your motorcycle at night. Available in white and amber.

Using the included wiring adapter, the DRLs can be directly plug-and-play connected to a CANsmart Accessory Controller or to any DENALI 2.0-series wiring harness. When connected to a DENALI 2.0 harness, the DRLs will run only in high-intensity mode. But when connected through the CANsmart, the DRLs can be fully dimmed.

Features:
- Dual Circuit: 50% & 100% intensity
- 180 viewing angle
- 6 Extremely bright LEDs per light pod
- Very efficient 12-watt total power consumption
- Size: 4.8in H x 1.1in W x 0.6in D
- Low profile design

What's in the box:
- (2x) DENALI DRL Pods
- (2x) Fender mounting brackets
- (1x) M5 & M6 Fender mounting hardware kit
- (2x) Wiring pigtail
- (1x) Wiring splitter
- (2x) Wiring adapters for DENALI CANsmart or 2.0-series lighting harness
- (3x) Posi-taps